Positive Isolation - Blinds
We have a tank farm where aviation turbine fuel ( ATF) or jet fuel is stored in the refinery.
"Hammer
blinds'are being used for positive isolation which will isolate the
tanks from the system so that contamination of the product is
prevented.
Operators of the blinds complain that they find it
very difficult to operate ( Physically removing the blinds has resulted
back injury) and change the position of the blind each time it is
required for On off operations.
In order to bring the positive isolation , motorised valves were thought of but it was not approved due to various reasons.
Can
any suggest , what is the alternative to implement positive
isolation , where positive isolation is possible without HSE prolems?
We have a tank farm where aviation turbine fuel ( ATF) or jet fuel is stored in the refinery.
"Hammer
blinds'are being used for positive isolation which will isolate the
tanks from the system so that contamination of the product is
prevented.
Nordstrom also makes a double block and bleed valve: two lubricated plug valves in one body, with gear operators for manual operation.
MORE NEWS