two kinds of plug valves
There are two kind of plug valves, pls check the following valves,
2-port Valve - It is the most common type of Valve. It has two positions -
"open" to permit the flow, and "shut" to prevent the flow. The plug has only one
passageway that passes through it. Everyone should know that ports are those
openings in the body of the valve where the fluid will pass in and pass
out.
3-way Valve - Also, there are valves that have more than two ports. In a
3-way valve, the flow from one port to another can be passed through either the
second or the third port. It can distribute the flow evenly into the three
ports or with just one, depending on the way it should be done.
Regardless of
what valve should be used, it must control the flow of substances like water,
natural gas, oil and even acids. One of the key factors to maintain the valve's
quality is by proper maintenance. Furthermore, it should be installed properly.
Seeking help from the experts in valve installation can get the job done. Those
factors should be considered if an industry wants to use valves for many years
to come. Also, proper installation can prevent any potential risks.
However,
it should be known that plug valve should not be used as a flow regulator. Any
alterations in its use may cause serious problems. Valves are made to control
the flow rate, direction or pressure. Its invention has made an impact in the
mechanical industry where its use is required. Overall, it is a must to look for the best quality valves to achieve
great performance. It can benefit the whole industry by employing its
use.
