Im about to work on a 4l60, but i dont know if its a 4l60 or 700r4. the output shaft is a 27 spline. i havent counted the converter splines. anyone know if this is a 700 or 4l60?

A few newish European cars now have no sump plug and the oil is sucked out of the dip tube when changing it, I can't think of a more stupid idea, but there must be a reason for it, anyone any ideas?*

In a valve data sheet I found ZCMS 66 specified as seat and spring material. I didn't any International standard referring to it. Does anybody know if this is a specific manufacturer standard or what

I have a question when specifying pressure drop across a control. If the upstream pressure is 300psig, and the fluid will flow to a downstream vessel operating at 30psig, would the delta P specified b

This concerns exhaust valve failures (valve head separating from the valve spindle) on a CAT 3516 generator engine on an offshore jack-up drilling rig.

I am working with a '90 Toyota tercel 1.5L sohc 4cyl. and for reasons unknown to me, every month or so, the #1cyl spark plug needs changing due to broken porcelin surrounding the electrode which in tu

The question came up at work: Does the timing light flash as the current passes through the inductive pick up or does it flash as the current jumps to ground via the spark plug?

I am trying to write some functions to calculate the velocity, acceleration, and jerk (change in acceleration) of some valve motion data.The data is typically about 220 points.The x axis is evenly spa